Kody Lights for Cravot Bike Racks
Light kits built for the Cravot CyberRack — both the E1 and the E2. Brackets bolt to your rack's own hardware — no drilling and no modifications.
Small — one 16" bar · Medium — two 12–13" lights · Large — two 16" lights
Driving a Tesla or a Ford? Choose a Medium or a non-sequencing Large — see what works on your vehicle.
Which Cravot rack do you have?
Either one — the same bracket fits the CyberRack E1 and the E2 and plus versions with the handle, so you don't need to check before you order. We also have lights that fit the older version of the S1, S2 and S3 (S-Series) Cyber racks as well.
What you do need to pick is how it wires up. Choose the four-pin flat connector if that's what your vehicle has, or the seven-blade if you want the heavier-duty cable — the seven-blade is also what enables the reverse light and the plate light. Then pick your cable length: short at 70", long at 116", or extra long at 164". Measure from your vehicle's connector to where the light will sit, and give yourself some slack for the rack tilting down.
Need your plate seen too? The Bike Rack License Plate Holder – Pivoting is made for the Cravot CyberRack E. It works on its own, so you don’t need a Kody light with it.
Choosing your size
Our sizes describe the light fixture, not the rack.
Small — one 16" bar with sequential turn signals.
Medium — two 12" or 13" lights.
Large — two 16" lights.
For one or two bikes, Small is the clean choice. Loaded up, the rack gets wide and bikes start covering your vehicle's own lights, so the extra spread and output of Medium or Large earns its keep.
Two reasons to size up even on a two-bike setup. The Small bar shares its bulbs between the brake light and the turn signal, so braking overrides the signal — we suggest signalling before you brake. And reverse lights are only available on the double fixtures.
Driving a Tesla or a newer Ford?
Choose a Medium or a non-sequencing Large. Tesla and 2016-onward Ford electronics interfere with the sequential sweep, so a sequencing light won't animate properly on those vehicles. Everything still works, you just lose the animation. Here's what happens and the two ways to fix it.
Lights flickering, or a warning on the dash? That's a different problem — here's what causes it on newer vehicles.
Don't see your rack?
If you've got a Cravot we don't list, or a rack from another brand, our universal lights mount to almost anything using straps or U-bolts. Or send us a message with your rack model — I'd rather get you the right light than the nearest one.