Kody Lights for QuikrStuff Bike Racks
Light kits built for the QuikrStuff Mach2. Brackets mount with Voile straps or rubber-coated hose clamps — no drilling and no modifications.
Small — one 16" bar · Medium — two 12–13" lights · Large — two 16" lights
Driving a Tesla or a Ford? Choose a Medium or a non-sequencing Large — see what works on your vehicle.
Which Mach2 setup do you have?
There's only one rack to worry about here, so the question isn't which Mach2 you own — it's whether you run the bike ramp.
Choose the short bracket for a standard install, mounting the light close to the rack. Choose the long bracket if you use the Mach2 loading ramp — it extends underneath so the ramp still swings clear.
Then pick how it attaches. Two Voile straps if you want to pull the light off and move it between vehicles. Two rubber-coated hose clamps if it's staying put. Both protect the rack's finish.
We also make an anti-theft bracket set specifically for the Mach2 — it's on this page, above.
Need your plate seen too? The Bike Rack License Plate Holder – Pivoting is made for the QuikrStuff Mach2, with or without the ramp. It works on its own, so you don’t need a Kody light with it.
Choosing your size
Our sizes describe the light fixture, not the rack.
Small — one 16" bar with sequential turn signals.
Medium — two 12" or 13" lights.
Large — two 16" lights.
For one or two bikes, Small is the clean choice. More bikes block your tail lights as you add trays, so at three or four bikes the extra spread and output of Medium or Large is worth having.
Two reasons to size up even on a two-bike setup. The Small bar shares its bulbs between the brake light and the turn signal, so braking overrides the signal — we suggest signalling before you brake. And reverse lights are only available on the double fixtures.
Driving a Tesla or a newer Ford?
Choose a Medium or a non-sequencing Large. Tesla and 2016-onward Ford electronics interfere with the sequential sweep, so a sequencing light won't animate properly on those vehicles. Everything still works, you just lose the animation. Here's what happens and the two ways to fix it.
Lights flickering, or a warning on the dash? That's a different problem — here's what causes it on newer vehicles.
Don't see your rack?
If you've got an older QuikrStuff, or a rack we don't make a bracket for, our universal lights mount to almost anything using straps or U-bolts. Or send us a message with your rack model — I'd rather get you the right light than the nearest one.
