top of page

We recommend double lights on newer Fords and Tesla Model YsContact Us with questions.

Kody lights are the brightest and most durable on the market providing peace of mind when using your bike rack.  

 

The rugged, highly visible Kody Technologies dual 16-inch LED Rack Lights creates eye-catching tail, brake, and turn signals. The light integrates cleanly on your rack and uses a standard 4-pin trailer or 7-blade connector for easy installation.

 

This rack light is designed specifically for the 1Up Equip-D bike rack.  Be sure to check out our other Kody Lights for 1Up Bike Racks.

 

Most photos on this product page show our 16" basic red lens light (non-sequencing light).  We offer both clear lens with red LEDs and red lens lights.  We default to the clear lens or based on what inventory is available.  If you have a preference please let us know.  

 

This light separates the brake, turn and tail lights into independant left and right hand light fixtures.  Each light fixture is 16" wide and provides bright, clear and visible signalling.  The lights are installed on our custom heavy duty bracket for mounting to your bike rack.   The total width of the lights and bracket is just under 33" wide.  

 

Pivoting Light

This light uses our friction hinge pivot design.  The pivot allows you to adjust the position of the light so it can be seen in both the up or stored position as well as the down or bike loaded position.  To position the light just push or pull the light into the desired position. For more information about Pivoting lights please check out our Pivoting FAQ.  The friction hinge pivot can lose position when used in combination with our license plate holder, also discussed in the FAQ.  

 

Cable Lengths

We provide three cable length options.  The cable lengths include Short  (5'), Long (9') and Super Long (13').   Each cable measures a bit longer than the foot length shown.  The Short cable will work in most applications using a standard bike rack with up to four bike trays.  Please see our FAQ page for information regarding how to select the right cable length for your rack set up.  

 

Vehicle Connections and Reverse Light

For this option, choose between a standard four pin and a standard seven blade connectors.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, the seven pin connector and licence plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights.   

 

Double 16" Light Options 

We offer four different 16" wide light fixture options;

  • Basic brake/turn/tail light, clear lens with red LED lights (we also have a red lens, if you're interested please let us know your preference)
  • Basic brake/turn/tail light with built in reverse, clear lens with red LED lights and white reverse lights.
  • Our original sequencing light with red lens
  • Our original sequencing light (red lens) with added reverse lights

Each light option is very bright and will help you be seen on the road.  Reverse light requires a seven blade trailer connector.  

 

License Plate Holders

We do not recommend using a license plate holder with this light application.  It can be done but might cause some issues.  Please reach out and we can discuss your application.  

 

Configuration and Pricing Note: The total light price displayed will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  

 

If you have any questions please contact us and we can discuss in more detail.  

Equip-D 1Up Bike Rack - Pivoting Double 16" Light

PriceFrom $235.00
    • Incredibly bright LEDs and reflectors to clearly communicate your signals. 
    • Dual 16" wide, LED Light Bar with tail, brake and turn signal.   
    • Basic dual lights do not sequence left or right like our original animated light; they flash the entire fixture for turn signals.
    • Custom designed rack mount bracket made from 1/8" thick Steel,  Custom designed light bracket made from 1/8" Aluminum or Steel
    • Powder coated black for durability and sleek aesthetics.
    • Light is mounted to the bracket with stainless steel hardware (socket head cap screws, washers and nylon lock nuts) for corrosion resisitance and to not rattle loose.
    • Rigidly mounts to the rack for clean, seamless and rugged looking fit. 
    • Excellent Product Video by Richard (YouTube)
    • Installation Instructions (same as single light)
    • Video Install Instructions (YouTube)
    • IP67 waterproof and fully submersible construction, designed to resist water and dust intrusion for exceptional all-weather durability.
    • Wiring Harness with standard 4-Pole Flat Trailer Connector or Seven Blade Trailer Connector 
    • Cable Lengths of Short (5'), Long (9')  or Super Long (13') cables 
    • Simple installation using new hardware.
    • Designed specifically for the Yakima StageTwo bike racks
    • Inside the box: Rack Light Assembly, Installation Hardware, Cable Ties and a couple Cool Stickers.
    • We do not recommend using a plate holder with this option.  It is possible but please contact customer service beforehand. 
    • One Year Product Warranty 

Also Sold With...

bottom of page