Kody lights are the brightest and most durable on the market providing safety and peace of mind when using your bike rack.
Most photos on this product page show this light on a RockyMounts GuideRail which uses the friction hinge pivot design. The Monorail series lights use the mechanical hinge design. Once we have more RockyMounts MonoRail photos we will update this page. On the MonoRail series, the light is mounted or sandwiched between the last bike tray and the main center beam of the rack (please see install instructions). This light is positioned at the end of the bike rack and sits past the last wheel lock arm. Please CONTACT US with any questions.
This light uses two 12" light fixtures to separate the brake, turn and tail lights. Each light fixture is 12" wide and provides bright, clear and visible signalling. The lights are installed on our custom heavy duty bracket for mounting to your bike rack. This dual light does not sequence left or right like our single light; it flashes the entire left or right fixture for turn signals.
The rugged, highly visible Kody Technologies dual 12-inch LED Rack Lights creates eye-catching tail, brake, and turn signals. The light integrates cleanly on your rack and uses standard 4-pin or 7-blade trailer connector for easy installation.
This rack light is designed specifically for RockyMounts MonoRail Series bike racks including the BackStage, HighNoon FC and MonoRail bike racks. On the HighNoon, the end cap needs to be removed or modified to fit with the light and there is an interference between the center beam welds to the tray mount and the light mount. The light can be installed with some additional spacers. Please contact us to discuss. This light will not fit on the Solo versions of these racks due to it's length. Check out our other Kody Lights for RockyMounts Bike Racks.
Pivoting Light
This light pivots for use in both rack down with bikes loaded and rack up and stored positions. To position the light just loosen the clamps, pivot the light into the desired position and tighten the clamps. If you have questions regarding these pivots please reach out to us or check out our Pivoting FAQ.
Cable Lengths
We offer three cable length options. The cable lengths include Short (5'), Long (9') and Super Long (13'). Each cable measures a bit longer than the foot length shown. The Short cable will work in most applications using a standard bike rack with up to four bike trays. Please see our FAQ page for information regarding how to select the right cable length for your rack set up.
Vehicle Connections and Reverse Light
For this option, choose between a standard four pin and a standard seven blade connectors. The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights. Upgrading to the seven blade option adds a heavier duty cable, a seven pin connector which can power reverse lights and a licence plate light connector (we call it plate ready). Choose the correct connection to eliminate the need for adapters and prepare for future upgrades. Seven blade is required for reverse lights.
License Plates
We have three options for plate holders and a plate light. The plate option for this light can cause issue with the hinge mechanism. If you're interested in a plate holder for this light it's best if your bike rack light does not ride above the height of your vehicle where it experiences direct wind on the road. Please call us if you have any questions.
Please see the list below to understand each option.
No Plate Accessory: I just want my light and nothing to do with any license plate holders.
Plate Holder - No Light: Plate holder with no electrical connection or light. This includes a bracket mounted to the main light which provides a licence plate mounting location and plate mount hardware
Plate Holder - With Light: Plate holder with plate light. This includes the plate holder mentioned above as well as a second bracket to install the plate light, integrated cable wiring and the plate light.
Configuration and Pricing Note: The total light set up pricing will not populate or update until you have made a selection for all options. Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.
If you have any questions please contact us and we can discuss in more detail.
RockyMounts MR Series Bike Rack - Pivoting Double 12" Light
- Incredibly bright LEDs and reflectors to clearly communicate your signals.
- Dual 12" wide, 9 LED Light Bar with tail, brake and turn signal.
- This dual light does not sequence left or right like our single 16" sequencial light; it flashes the entire fixture for turn signals and hazards.
- Custom designed bracket made from 11 gauge cold rolled steel.
- Powder coated black for durability and sleek aesthetics.
- Light is mounted to the bracket with stainless steel hardware (socket head cap screws, washers and nylon lock nuts) for corrosion resisitance and to not rattle loose.
- Rigidly mounts to the rack for clean, seamless and rugged looking fit.
- Installation Instructions (same install as single light)
- IP67 waterproof and fully submersible construction, designed to resist water and dust intrusion for exceptional all-weather durability. DOT Compliant
- Wiring Harness with standard 4-Pole Flat Trailer Connector or Seven Blade Trailer Connector
- Cable Lengths of Short (5'), Long (9') or Super Long (13') cables
- Designed specifically for the RockyMounts BackStage, HighNoon FC and MonoRail Racks. On the HighNoon, the end cap needs to be removed or modified to fit with the light. This light does not fit on the Solo versions of these racks.
- Inside the box: Rack Light Assembly, Installation Hardware, Cable Ties and a couple Cool Stickers.
- Plate holders come with phillips head and thumb screws for securing your license plate.
- One Year Product Warranty
