Kody lights are the brightest and most durable on the market providing peace of mind when using your bike rack.
 
This light is our medium sized light set which uses two brake, turn and tail lights for independent left and right hand signals.  Each light fixture is 12 to 13" wide and provides bright, clear and visible signaling.  The lights are mounted to our custom heavy duty bracket for mounting to your bike rack.   The total width of the lights and bracket is just under 27" wide.
 
The rugged, highly visible Kody Technologies dual medium LED bike rack lights create eye-catching tail, brake, and turn signals and reverse signals as an option.  The light integrates cleanly on your rack and uses a standard 4-pin or 7-blade trailer connector for easy installation.  
 
This rack light is designed specifically for the Yakima OnRamp bike racks.  Check out our other Kody Lights for Yakima Bike Racks.
 
Pivoting Light
The Pivot design allows you to rotate the light fixture for use in both the up / stored position and the down / bike loaded position.  This light's pivot design uses our mechanical hinge and uses two thumbs screws as a locking mechanism to hold it in place. To position the light just loosen the thumb screws, push or pull the light into the desired position and then tighten the thumbs screws.
 
If you have questions regarding the pivot option please reach out to us or check out our Pivoting FAQ or contact us to discuss.
 
Cable Lengths
We provide three cable length options.  The cable lengths include Short  (5'), Long (9') and Super Long (13').   Each cable measures a bit longer than the foot length shown.  The Short cable will work in most applications using a standard bike rack with up to four bike trays.  Please see our FAQ page for information regarding how to select the right cable length for your rack set up.  
 
Vehicle Connections 
For this option, choose between a standard four pin and a standard seven blade connectors.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, the seven pin connector and license plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights.   
 
Light Fixture Options 
We offer two different medium sized light fixture options;
12" Basic brake/turn/tail light, with a red lens
13" Basic brake/turn/tail light with built in reverse, red lens for signals and white lens for reverse lights.
Each light option is very bright and gaurantee you're seen on the road.  Reverse light requires a seven blade trailer connector.  
 
License Plates
We have three options for plate holders and a plate light.  Please see the list below to understand each option.   
No Plate Accessory: I just want my light and nothing to do with any license plate holders.
Plate Holder - No Light: Plate holder with no electrical connection or light. This includes a bracket mounted to the main light providing a license plate mount location and plate mount hardware.
Plate Holder - With Light: Plate holder with plate light. This includes the plate holder mentioned above as well as a second bracket with the plate light and integrated cable wiring.
 
Configuration and Pricing Note: The total light set up pricing will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  
 
If you have any questions please contact us and we can discuss in more detail.