top of page

We recommend double lights on newer Fords and Tesla Model YsContact Us with questions.

Kody lights are the brightest and most durable on the market providing peace of mind when using your bike rack.  

 

The rugged, highly visible Kody Technologies dual 16-inch LED Rack Lights creates eye-catching tail, brake, and turn signals. The light integrates cleanly on your rack and uses a standard 4-pin or 7-blade trailer connector for easy installation. This rack light is designed specifically for 1UP bike racks including the Quik Rack, Heavy Duty, Super Duty and Xtreme Duty (does not fit the Equip-D rack).  Our lights can be used along side the 1Up EZ Pull plate and handle.  Check out our other Kody lights for 1Up Racks.  Please contact us if you have any questions regarding your bike rack application.  

 

This light separates the brake, turn and tail lights into independant left and right hand light fixtures.  There are two lights and each light fixture measures 16" wide and provides bright, clear and visible signalling.  The lights are installed on our custom heavy duty bracket for mounting to your bike rack.   The total width of the lights and bracket is just under 33" wide.  

 

This light pivots for use in both rack down with bikes loaded and rack up and stored positions.  To position the light just loosen the clamps, pivot the light into the desired position and tighten the clamps.  

 

Double 16" Light Options 

There are four different 16" wide light fixture options available including;

  • Basic brake/turn/tail light, white lens with red lights
  • Basic brake/turn/tail light with built in reverse, white lens
  • Our original sequencing light, red lens
  • Our original sequencing light (red lens) with added reverse light

Each light option is very bright and will help you be seen on the road.  Reverse light requires a seven blade trailer connector.  

 

Vehicle Connections and Reverse Light

For this option, choose between a standard four pin and a standard seven blade connectors.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, the seven pin connector and licence plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights.   

 

Cable Lengths

We provide three cable length options.  The cable lengths include Short  (5'), Long (9') and Super Long (13').   Each cable measures a bit longer than the foot length shown.  The Short cable will work in most applications using a standard bike rack with up to four bike trays.  Please see our FAQ page for information regarding how to select the right cable length for your rack set up.  

 

License Plates

We have three options for plate holders and a plate light.  Please see the list below to understand each option.  For more information on our plate options please check out License Plate Holders and Plate Lights.  The plate holder varies between the different main trailer light set up.  

No Plate Accessory: I just want my light and nothing to do with any license plate holders.

Plate Holder - No Light: Plate holder with no electrical connection or light.  This includes a bracket mounted to the main light which provides a licence plate mounting location and plate mount hardware

Plate Holder - With Light: Plate holder with plate light.  This includes the plate holder mentioned above as well as a second bracket to install the plate light, integrated cable wiring and the plate light.  

 

Configuration and Pricing Note: The total light set up pricing will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  

 

If you have any questions please contact us and we can discuss in more detail.  

1Up Bike Rack - Pivoting Double 16" Light

PriceFrom $235.00
    • Incredibly bright LEDs and reflectors to clearly communicate your signals. 
    • 33" wide assembly with dual 16" wide, LED Light Bars featuring tail, brake and turn signal.   We also offer a smaller 24" wide assembly with dual 10" wide LED fixtures that can be found on another product page.  
    • We offer three tail light options to choose from; a basic flashing tail/brake/turn, a basic flashing tail/brake/turn with built in reverse, and a sequencing tail/brake/turn.  The first two flash to indicate turn signals and hazards and last option sequencing the LEDs across the light fixture. 
    • Custom designed heavy duty bracket made from 11 gauge cold rolled steel.
    • Powder coated black for durability and sleek aesthetics.
    • The light is mounted to the bracket with stainless steel hardware (socket head cap screws, washers and nylon lock nuts) for corrosion resisitance and to not rattle loose.
    • Rigidly mounts to the rack for clean, seamless and rugged looking fit. 
    • Installation Instructions (same install as single light)
    • IP67 waterproof and fully submersible construction, designed to resist water and dust intrusion for exceptional all-weather durability.
    • Wiring Harness with standard 4-Pole Flat Trailer Connector or Seven Blade Trailer Connector and 60" (short), 108" (long)  or 156" (super long) cable lead. 
    • Designed specifically for the 1Up bike rack
    • Inside the box: Rack Light Assembly, Two Installation Screws and Washer, 15" and 8" Cable Ties, Instructions and a couple Cool Stickers.
    • One Year Product Warranty 
    • 1Up Bike Rack Light

Also Sold With...