top of page

We recommend double lights on newer Fords and Tesla Model YsContact Us with questions.

Kody lights are the brightest and most durable on the market providing peace of mind when using your rack.  

 

The rugged, highly visible Kody Technologies 16-inch LED Rack Light creates eye-catching tail, brake, and turn signals. The tail light turns on six of the twelve LEDs at partial brightness.  The LEDs animate or sequence left or right for turn signals.  And the brake light when activated turns on all LEDs to full brightness,overriding the turn signals.  Check out this YouTube Video showing the light in action.  The light integrates cleanly on your rack and uses a standard 4-pin or 7-blade trailer connector for easy installation.  

This rack light is designed specifically for Hollywood's Destination E-Bike Rack (HR4500).  

 

Be sure to check out our other Lights for Hollywood Bike Racks as well as our License Plate Holders and Plate Lights.  

 

Pivoting Light

We offer both Rigid or Pivoting light options. A rigid light is primarily used with the bike rack in the down position for when bikes are loaded. The light is bright and has some effectiveness in the stored position.

 

The Pivot design allows you to rotate the light fixture for use in both the up / stored position as well as the down / bike loaded position. We have two different pivot designs. One uses a friction hinge and does not require any locking mechanism to hold it in place. We recommend and ship this friction hinge on applications without licence plate holders. To position the light just push or pull the light into the desired position.

 

The second design uses a mechanical hinge and thumb screw locks. We recommend and ship this design for all applications with license plate holders. To position the light just loosen the clamps, pivot the light into the desired position and tighten the clamps.

 

If you have questions regarding these pivot options please reach out to us or check out our Pivoting FAQ. Also, if you prefer one design over the other please let us know and we can ship your preference. 

 

Cable Lengths

We offer three cable length options.  The cable lengths include Short  (5'), Long (9') and Super Long (13').   Each cable measures a bit longer than the foot length shown.  The Short cable will work in most applications using a standard bike rack with up to four bike trays.  Please see our FAQ page for information regarding how to select the right cable length for your rack set up.  

 

Vehicle Connections and Reverse Light

For this option, choose between a standard four pin or seven blade connector.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, a seven pin connector which can power reverse lights and a licence plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights and reverse lights are not available on Rigid light brackets.   

 

Configuration and Pricing Note: The total light set up pricing will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  

 

If you have any questions please contact us and we can discuss in more detail.  

Destination E-Bike Rack - Single 16" Light

PriceFrom $170.00
    • Incredibly bright LEDs and reflectors to clearly communicate your signals. 
    • 16" wide, 12 LED Light Bar with tail, brake and sequential turn signal.  See FAQ for details.  
    • Custom designed bracket made from 11 gauge cold rolled steel.
    • Powder coated black for durability and sleek aesthetics.
    • Light is mounted to the bracket with black 18-8 stainless steel hardware (socket head cap screws, washers and nylon lock nuts) for corrosion resisitance and to never rattle loose.
    • Rigidly mounts to the rack for clean, seamless and rugged looking fit. 
    • Installation Instructions 
    • DOT FMVSS-108 & submersible IP67 rated
    • IP67 waterproof and fully submersible construction, designed to resist water and dust intrusion for exceptional all-weather durability.
    • Wiring Harness with standard 4-Pole Flat Trailer Connector or Seven Blade Trailer Connector Cable Lengths of Short (5'), Long (9') or Super Long (13') cables 
    • Simple installation using existing bike rack hardware locations.
    • Designed specifically for the Hollywood Destination E-Bike Rack (HR4500). 
    • Inside the box: Rack Light Assembly, Installation Hardware, Cable Ties and a couple Cool Stickers.
    • One Year Product Warranty

Also Sold With...