Kody lights are the brightest and most durable on the market providing peace of mind when using your bike rack.  The rugged, highly visible Kody Technologies dual 16-inch LED Rack Lights creates eye-catching tail, brake, and turn signals. The light integrates cleanly on your rack and uses a standard 4-pin or 7-blade trailer connector for easy installation. This rack light fits Swagman racks including the E-Spec, Quad 2+2, Semi 2.0 and 4.0, Current, Dispatch, Escapee and Chinook. Please contact us if you have any questions regarding your application.
 
This light separates the brake, turn and tail lights into independant left and right hand light fixtures.  There are two lights and each light fixture measures 16" wide and provides bright, clear and visible signalling.  The lights are installed on our custom heavy duty bracket for mounting to your bike rack.   The total width of the lights and bracket is just under 33" wide.  
 
This light pivots for use in both rack down with bikes loaded and rack up and stored positions.  To position the light just loosen the clamps, pivot the light into the desired position and tighten the clamps.  
 
Cable Lengths
We provide three cable length options. The cable lengths include Short (70"), Long (116") and Extra Long (164"). The Short cable will work in most applications using a standard bike rack with up to four bike trays. Please see our FAQ page for information regarding how to select the right cable length for your rack set up.
 
Double 16" Light Options 
There are four different 16" wide light fixture options available including;
16" Lights:  Brake/turn/tail light, we have both Red and White lens options.  We default to shipping white so please let us know if you have a preference.  
16" Lights with Reverse: Brake/turn/tail light with built in reverse, this is only available with a white lens
16" Sequencing Lights: Our original sequencing light used on our single lights with a red lens
Each light option is very bright and will help you be seen on the road.  Reverse light requires a seven blade trailer connector.  

License Plates
We have options for adding a plate holder and plate light to your order.  Please see the list below to understand each option.  And for more information on our plate options please check out License Plate Holders and Plate Lights.  
No Plate Accessory: I just want my light and nothing to do with any plates.
Plate Holder with No Light: License plate holder with no electrical connection or light.  This is one bracket that attaches to the main tail light and provides a mount location for your license plate.  It also include M6x1.0 phillips screws and thumb screws for plate installation.   
Plate Holder With Light: Single position plate holder with plate light.  This option includes the plate holder as well as a section bracket to position the plate light and also add more mount locations for your license plate.  
 
Vehicle Connections and Reverse Light
For this option, choose between a standard four pin and a standard seven blade connectors.  The four pin connection powers tail lights (including plate lights if added), turn signals and brake lights.   Upgrading to the seven blade option adds a heavier duty cable, the seven pin connector and licence plate light connector (we call it plate ready).  Choose the correct connection to eliminate the need for adapters and prepare for future upgrades.  Seven blade is required for reverse lights.   
Configuration and Pricing Note: The total light set up pricing will not populate or update until you have made a selection for all options.  Once the selections are completed and the price is updated you can adjust your selections one at a time to see how the price varies.  
 
There is a lot of content to digest and understand.  Please reach out to us if you have any questions.  It's much easier to clarify unknowns before you purchase and receive a light.  Please visit out Contact Us Page for methods to reach out.